The filter is an indispensable device of the pipeline system for conveying media. It is usually installed at the inlet end of the equipment to remove particulate impurities in the media to protect the normal use of valves or other equipment. Moreover, the product has small body shape and low resistance, and it is convenient to discharge sewage. It can be applied to the transportation and filtration of water and oil. The mesh of the filter can be made according to the requirements of the user. The internal parts are usually made of stainless steel, which is strong and durable.
1. Material: carbon steel, cast steel, WCB, PTFE, 304, graphite gasket, rubber O ring, etc.
2. Size: 1/2"~10"(DN15-200)
3. Applicable medium: water, oil
4. Filter meshes: 40 M/in² or customer requirements
5. Working Pressure: 150LB~600LB
6. Design temperature:-29ºC~ +350ºC
7. Connection: flange connection
8. Features: small body shape and low resistance, and it is convenient to discharge sewage, etc.
1. The product can be installed horizontally A or vertically B. The direction of the medium during installation should be the same as the direction of the arrow on the casing.
2. In order to facilitate maintenance, the product should be installed and used together with the shut-off valve, and the shut-off valve should be installed both upstream and downstream of the product. Once the product needs to be repaired, the upstream and downstream valves can be closed to shut off the system.
3. It is best to install a differential pressure gauge upstream and downstream of the product(our items has the gauge together). If there is a difference in the readings of the upstream and downstream pressure gauges, it means that there are impurities on the filter element. When a medium flows through the product, the liquid resistance is much greater than normal using, you need to clean the filter in time;
4. In order to use the system normally when servicing the product, it is best to install a bypass line at the same time as the installation, normally close the shut-off valve on the bypass pipe, and open the bypass pipe when the product is being repaired Cut-off valve.
5. When installing the product, please pay attention to reserve a certain maintenance space for normal daily maintenance.
1. Our company recommends that after using this product for a period of time, you need to remove the internal filter to clean it, so as to prevent the filtered impurities from blocking the filter and increasing the liquid resistance, affecting the normal circulation of the system. Generally, it is better to clean the filter once every 3 months or at the differential pressure specified by the user.
2. After installing the cleaned filter back to the filter, please pay attention to whether there is any water leakage in the filter gasket. If leakage is found, replace the gasket in time.
3. After installing the product, the filter need to clean in a few hours to prevent the construction waste that remains in the pipeline during the installation of the pipeline from clogging the product.
Q: Are you manufacture or trading company?
A: We are manufacture and our factory is in in Oubei Town, Yongjia County, Wenzhou City, Zhejiang Province.
Q: What is your products' MOQ?
Q: Can you provide the sample for free?
A: Yes, we can provide the sample for free, but you need bear the delivery cost.
Q: If products have some quality problem, how would you deal with?
A: We will responsible for all the quality problems.
Q:If the product can be customized?
A: Yes, just let me know if you have any requirements, like applicable medium and size, etc.